| HAZARD |
satisfactory |
Needs
Attention |
Target Date of
Correction |
Date
Corrected |
| Are grinders, saws and similar equipment provided with appropriate safety guards? |
|
|
|
|
| Are power tools used with the correct shield, guard, or attachment, recommended by the manufacturer? |
|
|
|
|
| Are portable circular saws equipped with guards above and below the base shoe? |
|
|
|
|
| Are circular saw guards checked to assure they are not wedged up, thus leaving the lower portion of the blade unguarded? |
|
|
|
|
| Are rotating or moving parts of equipment guarded to prevent physical contact? |
|
|
|
|
| Are all cord-connected, electrically operated tools and equipment effectively grounded or of the approved double insulated type? |
|
|
|
|
| Are effective guards in place over belts, pulleys, chains, sprockets, on equipment such as concrete mixers, air compressors, etc.? |
|
|
|
|
| Are portable fans provided with full guards or screens having openings 1/2 inch or less? |
|
|
|
|
| Is hoisting equipment available and used for lifting heavy objects, and are hoist ratings and characteristics appropriate for the task? |
|
|
|
|
| Are ground-fault circuit interrupters provided on all temporary electrical 15 and 20-ampere circuits, used during periods of construction? |
|
|
|
|
| Are pneumatic and hydraulic hoses on power-operated tools checked regularly for deterioration or damage? |
|
|
|
|
| |
|
| Name |
Date |
This paper appears in the eLCOSH website with the permission of the author
and/or copyright holder and may not be reproduced without their consent. eLCOSH is an
information clearinghouse. eLCOSH and its sponsors are not responsible for the accuracy of
information provided on this web site, nor for its use or misuse.
