PESO is an easy-to-use, bilingual toolkit created by the Oregon OSHA Occupational Safety and Health Program to help employers deliver job safety training and reduce workplace injuries and illnesses.
The toolkit contains:
handouts for toolbox talks
training modules
overheads
All are in English and Spanish. The training programintroduces important safety and health topics to workers who may have only limited knowledge of U.S. safety laws and rules. Modules are designed to be taught in less than 60 minutes. The toolbox talk handouts are posted here on eLCOSH with links to the modules and overheads on the OR-OSHA website.
For more information, call OR-OSHA at 1 (800) 922-2689 or visit www.orosha.org.
The Center of Gravity moves when you lift or lower the load, tilt the mast, or travel.
Stability
If the forklift ´s Center of Gravity (CG) is within the Stability Triangle, it will not tip over.
Use a work platform equipped with a standard railing firmly secured to the carriage or forks
A guard must be provided between the worker(s) and the mast if exposure to the chains and/or shear points exists
Operate your vehicle responsibly!
Brief list for what to watch:
People
Speed
Speed bumps
Pot holes
Train tracks
Tight areas
Slick surfaces
Load capacity
Ramps and inclines
Loading ramps
Other vehicle traffic
Defined traffic lanes
This paper appears in the eLCOSH website with the permission of the author
and/or copyright holder and may not be reproduced without their consent. eLCOSH is an
information clearinghouse. eLCOSH and its sponsors are not responsible for the accuracy of
information provided on this web site, nor for its use or misuse.
OR-OSHA PESO – TOOLBOX SHEET
For COMPLETE information call OR-OSHA
1 (800) 922-2689 or visit www.orosha.org