Immediate Stop Use Notice: Guardian Fall Protection Diablo Big Block Leading Edge Self-Retracting Lifeline

| |

Summary Statement

This notice is intended to communicate product recall information regarding the Guardian Fall Protection Diablo Big Block Leading Edge Self-Retracting Lifeline. Due to a potential manufacturing defect over the period of February 2019 through February 2020, this product must be immediately removed from service and returned for inspection and repair, if required.”
March 2020

THERE HAVE BEEN NO ACCIDENTS OR INJURIES RELATED TO THIS NOTICE

Diablo Big Block SRL

Part Numbers Affected

The recall includes the following part #s:

  • # 10967: 65’ Diablo Big Block SRL.
  • # 10968: 50’ Diablo Big Block SRL.
  • # 10979: 50’ Diablo Big Block SRL.
  • # 10980: 65’ Diablo Big Block SRL.
  • # 10982: 60’ Diablo Big Block SRL.
  • Component of kit # 20055.
  • Private labeled versions of listed part #s.

 

 

 

 

 

 

 

Please take immediate action to complete the following steps:

STEP 1. Determine Date of Manufacture

Product date of manufacture is located at the bottom of the information label shown below. If the recorded date of manufacture is between February 2019 through February 2020, or if the date of manufacture is unknown for any reason, proceed to Step 2. If the date of manufacture is not within this time-frame no further action is required.

Image of location of model number on part

STEP 2. Remove Affected Product From SRL From Service

If the date of manufacture is between February 2019 through February 2020 the product must be immediately removed from service. Removal from service is also required if the date of manufacture is unknown. All affected product must be returned to Pure Safety Group for repair. DO NOT ATTEMPT TO REPAIR THE UNIT.

STEP 3. How to Coordinate Repair

Customers with an affected Diablo Big Block SRL must contact Pure Safety Group Customer Service to coordinate repair.

Please call: 1-800-466-6385 or email: recall@puresafetygroup.com

DO NOT RETURN PRODUCT TO PURE SAFETY GROUP WITHOUT OBTAINING A RETURN AUTHORIZATION NUMBER FIRST.

All affected units will be inspected and repaired if required, and returned to the customer by Pure Safety Group (including all shipping costs). Customer Service will provide instructions for shipping returned product on Pure Safety Group’s shipping account.

Please direct any questions to the Customer Service Department.

STEP 4. Additional Information

All returned Diablo Big Block SRLs will be relabeled with the date of repair and will be clearly marked as shown below to indicate the Diablo Big Block SRLs may be returned to service. See Fig. B and C.

Figure B Manufacture date is prior to 2/2019 or after 3/2020 - OK for use.  Figure C Back label will be marked with a green checkmark - OK for use

 

logos for Guardian, Checkmate, and Stronghold

607 East Sam Houston Parkway South, Suite 800, Pasadena, TX 77503 USA, puresafetygroup.com