ACCSH 1994-5, exh 15, Hexavalent Chromium Recommendations
Organization(s): OSHA Advisory Committee for Construction Safety and Health (ACCSH)
Collections: ACCSH – Selected Workgroup Notes & Materials
- ACCSH 1988-1, exh 1, Fatality/Catastrophe Investigation Final Report
- ACCSH 1994-5, exh 15, Hexavalent Chromium Recommendations
- ACCSH 1994-2, exh 3, Standards Clarification Report
- ACCSH 1994-4, exh 8, Engineering Work Group Final Report
- ACCSH 1994-5, exh 1, Record Keeping Work Group Report and Recommendation
- ACCSH 1994-5, exh 17, Safety and Health Programs Report and Recommendations
- ACCSH 1995-2, exh 11C, Steel Erection Negotiated Rulemaking Advisory Committee (SENRAC)
- ACCSH 1995-2, exh 13, Powered Industrial Trucks
- ACCSH 1995 -1, exh 18, Musculoskeletal Disorders Working Group Report
- ACCSH 1996-1, exh 5, Musculoskeletal Disorders Recommendations
- ACCSH 1996-2, exh 13&14, Safety and Health Programs Report and Final Draft
- ACCSH 1995-2, exh 15, Musculoskeletal Disorders in Construction
- ACCSH 1980-4, exh 1, Health Standards in Construction - Final Report
- ACCSH 1993-5, exh 8, Fall Protection
- ACCSH 1995-1, exh 10, Health and Safety of Women in Construction (HASWIC) Final Report
- ACCSH 1994-5, Exh 16, Hazwoper Working Group Recommendations
- ACCSH 1998-3, exh 16, Proposed Appendix B to Subpart L, Scaffolding
- ACCSH 2001-1, exh 7, Proposed Revised Sanitation Standard
December 8, 1994
eLCOSH Editor's note:
The OSHA Advisory Committee for Construction Safety and Health (ACCSH) was authorized in the 1969
Construction Safety Act (US Code Title 40§3704, to advise OSHA on matters related to construction
safety and health. It consists of five public representatives (one is normally from a State OSHA
program, one from NIOSH, etc.), five labor representatives (normally from various Building Trades
Unions) and five management representatives (primarily from contractor trade associations). The
ACCSH often sets up work groups, which are open to the public, to draft positions on various topics
or issues. These positions are then often voted on by the full ACCSH and those recommendations referred
to OSHA for their consideration. These work products represent a lot of effort and thought by many
individuals. They are posted here to make that work more easily accessible. This historical archive
many serve as a resource to future regulators and safety advocates, so they don’t have to
start from scratch. OSHA has removed some of these documents from their website which makes access
|FROM:||John B. Moran, Chair
Hexavalent Chromium Work Group
|SUBJECT:||Work Group Report/Recommendations.|
|DATE:||8 December 1994|
The Hexavalent Chromium Work Group met on the afternoon of 8 December 1994. Members Rhoten, Paul, Osario and Moran were present. OSHA CrVI Team members Freeman, Condit, and Lignon were also present.
The Chairs memorandum to the Work Group dated 10 November 1994 (and OSHA) was reviewed and discussed including the OSHA response regarding the ORC request that standards activity be delayed pending completion of a research study by Johns Hopkins.The Assistant Secretary's response to ORC was reviewed. That response indicated that the rulemaking activity would proceed.
The WOrk Group concluded that a number of issues were of importance with regard tot he proposed rule and its application to the construction sector. These included:
1. While many of the elements of a comprehensive standard addressing exposures to CrVI will be common in both general
industry and construction, such as medical surveillance, many other elements must be construction specific.
2. The presumptive exposure approach used in the interim Final Lead Standard for Construction is an appropriate approach to be used in the CrVI standard elements applicable to construction. The "scope" of the Interim Lead Standard was viewed as appropriate tot he proposed CrVI standard.
3. Much additional data is needed to better frame the construction environment situations where exposure to CrVI are likely. To that end, the Work Group members agreed to:
a. Provide research literature collected by the Chair to OSHA pertaining to CrVI exposures during welding operations (done).
b. Seek information from SSPC with regard to metal coatings containing Crvi in the past and current coating products containing CrVI. (Moran).
c. Seek information from the California lead registry regarding CrVI. (Osario).
d. Seek information from bridge work involving lead-chromate paint in California and under the scope of the CT CRISP study. (Osario).
e. Seek information on the prevalence of CrVI as a hazardous waste contaminant on NPL sites. (Moran).
f. Seek information on the presence of Cr in the DOD MSDS Data file (Moran).
g. Provide estimates of the percentage of work conducted in welding operations involving metal compositions which include Cr. (Rhoten)
h. Seek information from welding equipment and welding stick manufacturers on products containing Cr to include pipefitters and boilermakers. (Rhoten).
i. Seek information on the prevalence of welders in the construction industry in the Califronia Asthma Registry (Osario).
j. Establish a coordination point with BCTD Welding Fume Sub-Committee. (Rhoten and Moran).
The Work Group sees the immediate need to obtain data on the CrVI exposures occurring in lead-based paint disturbance activities involving lead-chromate paints. The key question is whether the current protection provided under the Interim Lead Standard provide appropriate protection for exposures to CrVI. Several of the actions noted above are aimed at that objective.
The Work Group recommends:
1. That the members seek the information outlined above and provide that information to the OSHA CrVI standards team.
2. That the Work Group hold a half-day meeting immediately prior to the next Committee meeting for the purpose of reviewing the information collected and its significance.
3. That OSHA provide the Work Group the draft regulatory text of the CrVI proposed standard at the earliest opportunity.
OSHA Advisory Committee for Construction Safety and Health (ACCSH)
More like this
Abstracts & Summaries