Training on how to protect your back and lift properly– includes questions for discussion and a sign-off form. Part of a collection. Click on the 'collection' button to access the other items.
|These tailgate/toolbox talks were developed for use under California OSHA regulations. The complete set is available from the Labor Occupational Health Program at UC Berkeley. For ordering information, visit the website (www.lohp.org) The American Conference of Government Industrial Hygienists (ACGIH) has adapted these talks to apply to federal OSHA regulations. To contact ACGIH, visit its web site (www.acgih.org).|
Before you begin
- Does this topic
relate to the work the crew is doing? If not, choose another topic.
- Did you read this Training Guide and fill in the blanks where the appears? (To find the information you need, look over the Safety Walkaround Checklist for this topic.)
- Did you bring a large object (such as an empty box) so you can demonstrate lifting techniques at the meeting?
your back! Abusing it can cause painful and even permanent injuries. Construction
workers miss work because of back injuries more than any other reason.
Your back can slowly get worse or can suddenly “go out.” Either
way, the results are the same—a lot of pain and you’re off work!
So let’s talk about how to protect your back.
You or a crew member may want to add a personal story about back injuries.
ASK THE CREW THESE QUESTIONS:
After each question, give the crew time to suggest possible answers. Use the information following each question to add points that no one mentions.
1. What are some
common causes of back injuries in construction?
- Lifting materials
that are too heavy or unstable
- Lifting objects
to or from awkward locations (for example, placing overhead or lifting
from the ground)
- Repetitive twisting,
bending, reaching overhead, or lifting
- Working for long
periods in a bent over or strained position
- Tripping over debris.
- Wearing tool belts that are too heavy
- Lifting or doing any physical labor when you haven't "warmed up."
2. How can you
avoid back injuries on the job?
The best way is to
plan the job to reduce the need for lifting, twisting, bending, or reaching
overhead. Change how the job is done, or change the tools you use. Here
are some examples.
- Store materials
off the ground, so you don’t have to bend so much to lift.
- Store materials
where there is space to lift them safely, without reaching or twisting.
- Have materials
delivered close to where they will be used.
- Split up large
loads into smaller, lighter loads.
- Change the setup
of the job. (Perhaps adjust the angle and height of work surfaces.)
- Use a manual
lifting or carrying device (like a dolly, hand truck, pry bar, or hook).
- Use a mechanical
lifting device (like a forklift, hoist, crane, or block and tackle).
- Use tools that
minimize bending and reaching (like tools with longer handles).
- Make sure walkways are kept clear to allow the use of material handling devices like carts and dollies.
3. Step-by-step, how do you lift a heavy object safely? Tell me how to do it.
Remember that proper
lifting techniques cannot protect you if the object is too heavy, awkward
to hold, or cannot be held close to the body.
should demonstrate the steps below. Use an empty box or something similar
(not an object that’s very heavy). Have the crew suggest correct
techniques for lifting the object and for setting it down. Demonstrate
these techniques as the crew instructs you.
- Face the object.
Place one foot behind the object and the other foot beside it.
- Bend your knees
but keep your back straight. Grip the object firmly with both hands.
- Bring the object
close to your body. Keep your chin, elbows, and arms tucked in tight.
Keep your body weight directly over your feet.
- Lift with your
- Do the same process
in reverse when you set the object down.
- Avoid any twisting motions.
4. What about back support belts? Are they a good way to protect yourself?
Most research says
that back belts will not protect you from back injuries.
- They can give
you a false sense of security, so you try to lift too much weight.
- Leaving the belt
tightened for long periods can actually increase your chances of being
injured when you have to lift without the belt.
- People who wear
belts have more upper back injuries.
- Belts can be
hazardous for people with high blood pressure.
- A belt should never be a substitute for designing the job to minimize manual material handling. Instead of a belt, use mechanical lifting when possible. If you must lift manually, proper lifting techniques protect you better than a belt
5. What are some tasks on this job that could be bad for your back? And what can we do to make these tasks safer?
6. According to
Cal/OSHA, we must have a written Injury and Illness Prevention Program
(IIPP) for the site. Back and lifting hazards are included in our IIPP.
Do you know what our IIPP says about them?
- The company will
inspect the job site for all health and safety hazards, including
back and lifting hazards.
- We will take
steps to reduce any hazards, where feasible.
- We will investigate
accidents that cause back injury.
- We will provide
needed safety equipment, like manual and mechanical lifting devices.
- We will maintain
safety equipment in good condition, and keep it close to the work being
- We will give you training.
Explain: The safety measures we’ve talked about are included in our company’s Injury and Illness Prevention Program (IIPP), as required by Cal/OSHA. At this time, there are few specific Cal/OSHA regulations on back hazards or lifting. However, Cal/OSHA did recently adopt a new ergonomics standard designed to reduce repetitive motion injuries. On any construction job, if there has been more than one ergonomic injury within a year to workers doing the same task, the company must take steps to
identify and correct these hazards. We must also provide relevant training. I have a Checklist of recommended safety measures. If you'd like to know more, see me after the meeting.
(Only if applicable.) We have some additional company rules to prevent back injuries.
Discuss company rules:_______________________________
COMMENTS FROM THE CREW
Ask: Do you have any other concerns about back injuries or lifting? Do you see any problems on our job? (Let the steward answer first, if there is one.)
What about other jobs you’ve worked on? Have you had any experience with back injuries or lifting that might help us work safer on this job?
Sign Off Form
BACKS and LIFTING
NAMES OF THOSE WHO ATTENDED THIS SAFETY MEETING